Configuration/settings
User manual 55170_hdb_en_13 58 / 145
8.2.2 Diagnostic parameters
Diagnostic report
The diagnostic report defines
whether module-specific diagnostics should or should not be reported to
the controller connected to the slot.
Tab. 8-10: Diagnostic report
Fig. 8-5: Diagnostic report
Selection Meaning
D = Default
Report Global diagnostic enabled D The module reports all module-specific diag-
nostics to the controller that is connected to the
slot.
Do not report Global diagnostic dis-
abled
The module does not report module-specific
diagnostics to the controller that is connected to
the slot.
To Next Page
Loading...
Need help?
General
