Need help?Do you have a question about the Myray RX DC and is the answer not in the manual?
General| Generator Type | High Frequency |
|---|---|
| Tube Current | 7 mA |
| Exposure Time | 0.01-3.2 s |
| Connector | USB |
| Tube Voltage | 60-70 kV |
Explains the meaning of various safety and information symbols used in the manual.
Specifies the designed application of the X-ray unit for dental diagnostics.
Details the medical device classification according to EEC Directive 93/42.
Outlines the required temperature, humidity, and atmospheric pressure for installation.
Covers the terms and conditions of the product warranty.
Provides an overview of the X-ray device and its available versions.
Explains the different operating modes (En60, En63, En65, AUTO) of the unit.
Instructions on how to power the X-ray unit on and off.
Details the various icons and indicators on the handheld display.
Describes the functions of the buttons on the handheld control pad.
Guides the user on verifying selected collimator, body build, and exam type.
Lists the default factory configurations for the X-ray unit.
Explains how battery charge level is displayed on the handheld.
Describes the status indicator light on the X-ray generator.
Guidelines for correctly positioning the patient for X-ray imaging.
Instructions for aligning the X-ray head with the image receiver.
Details the correct positioning of the X-ray plate or sensor.
Explains how to adjust exposure mode and time using the handheld.
Describes how to customize settings for specific tooth-patient combinations.
Step-by-step guide for performing an X-ray exposure.
How to activate the safety unlock mode for the ball joint.
Instructions for selecting the desired operating mode of the unit.
Instructions on setting the type of collimator used.
Procedure to restore the device to its original factory settings.
Displays dimensions and mounting details for the wall-mounted version.
Displays dimensions and mounting details for the incorporated version.
Displays dimensions and mounting details for the XT version.
Checklist for routine user inspections to ensure safety and reliability.
Details procedures for professional technical maintenance and calibration.
To Next Page
