NAPCO Gemini GEM-P1632 User Manual


NAPCO Security Systems
GEM-P1632 Programming Instructions
WI897B 8/98

Page 37

Cold Start (Erases Entire Program)
This erases the entire program including Dealer Program by
erasing Program Data, Zone Description Data and System
Status Data (similar to a new panel).
Access address 1198, then press the
button. Data entry is not allowed.
NOTE:
Some features (schedules) can only be programmed again with the
Downloading Software.
GEM-RP1CAe2 Keypad

GEM-RP2ASe2 Keypad

Clear Dealer Program (Erases Dealer Program)
This erases the dealer program . Use this feature to start a
customized default program. Program Data and System
Status Memory is erased where Scheduled Data and Zone
Descriptions are maintained.
Access address 1197, then press the
button. Data entry is not allowed.
NOTE:
Enter Easy Menu Driven Program Mode to program system again.
GEM-RP1CAe2 Keypad

GEM-RP2ASe2 Keypad

PROGRAMMING OPTIONS & WORKSHEETS

NAPCO Gemini GEM-P1632 Specifications

General

Brand	NAPCO
Model	Gemini GEM-P1632
Category	Control Panel
Language	English