Napco iSecure Security System All technical manuals are available in PDF format at tech.napcosecurity.com 47
Programming: Window / Door Transmitters
1. Go to www.iSecureByNapco.com and log into your
iSecure account.
2. Click Sensor Configuration.
3. In the SENSOR CONFIGURATION screen (shown
below), program the installed transmitters as indicat-
ed (when finished, click Save).
ISEC-DW-XMITTER Window / Door Transmitter
DESCRIPTION
Type the sensor descrip-
tion you wish to appear
on the keypad display
SENSOR TYPE
Select "Door
Window".
SENSOR ID
Type in the 7
digit sensor
ID # for the
device
ENABLE REPORTING
Check to enable cen-
tral station reporting
1
2
4
5
6
3
SENSOR FUNCTION
Exit/Entry 1 & 2: Allows for exit delay (when leaving the premises) and entry delay (when
entering) before triggering an alarm. One of two separate exit/entry combinations can
be selected.
Interior: Use when armed "STAY" (usually at night when sleeping), and you want the
system to ignore this sensor. For example, use for an interior door that will be in use
when armed "STAY" but protected when armed "AWAY".
Instant: Allows for an immediate alarm when activated, providing instant protection while
you or someone else is in the premises.
24Hr Zone Audible: Provides protection at all times, whether or not the system is armed,
by sounding an alarm when the door or window is opened.
24Hr Zone Silent: Provides protection at all times, whether or not the system is armed.
When armed and the door or window is opened, a silent alarm will be sent to the cen-
tral station.
Audible Panic: Triggers the siren to immediately sound and an emergency report sent to
the central station.
Silent Panic: Triggers a silent report to be sent to the central station (i.e. the user can
silently signal an emergency).
7
SIGNAL STRENGTH
Relative intensity of
the last transmission,
on a scale of 1-10 (10
being the strongest).
Note: A reading of 3
or less indicates re-
ception may be errat-
ic; relocate the sensor
closer to the Hub.
AREA
Default = 1. See the keypad
Operating Guide for the defini-
tion of "Area".
CHIME
Check to sound a chime when
a door (or window) is opened in
an unarmed system.
To Next Page
Loading...
Need help?
General
