Napco iSecure Security System All technical manuals are available in PDF format at tech.napcosecurity.com 73
ORDERING INFORMATION
Complete Professional System Kits
• Kit 1 (ISEC-KIT1) with ISEC-WL-KEYPAD Wire-
less Battery-Powered Standard Keypad: All-
Inclusive system includes a Go-Anywhere Smart
Hub with up to 80 zones, siren and integral dual
path cell/IP LTE reporting, wireless LCD keypad
(lithium battery-powered), security and notifica-
tions from consumer app, 50' wireless PIR and
two wireless window/door contact transmitters.
Provision for a 4AH or 5AH backup battery (not
supplied) for power outage protection. 1 hour in-
stallation, dealer programming via cellphone or
tablet.
• Kit 2 (ISEC-KIT2) with ISEC-WL-TOUCH Wire-
less 4.3" Full Color Security Touchscreen
Keypad: All-Inclusive system includes a Go-
Anywhere Smart Hub with up to 80 zones, siren
and integral dual path cell/IP LTE reporting, wire-
less security touchscreen, integral Z-Wave con-
trol from consumer app, virtual keypad and SMS
text notifications, 50' wireless PIR and two wire-
less window / door contacts. Provision for a 4AH
or 5AH backup battery (not supplied) for power
outage protection. 1 hour installation, dealer pro-
gramming via cellphone or tablet.
• Kit 3 (ISEC-KIT3) with Connected Home/Video/
Security IBR-TOUCH-WL Smart 7" Wireless
IoT Touchscreen: All-Inclusive system includes
a Go-Anywhere Smart Hub with up to 80 zones/
points, siren and integral dual path cell/IP LTE
reporting, integral Z-Wave control from
touchscreen or app. Wireless multifunction 7"
TFT security touchscreen controls smart automa-
tion, video-viewing and security functions. One
50' wireless PIR and two wireless window/door
contact transmitters. Provision for a 4AH or 5AH
backup battery (not supplied) for power outage
protection. 1 hour installation, dealer program-
ming via cellphone or tablet.
System Components
• ISECURE GO-ANYWHERE SMART HUB: In-
cludes up to 80 wireless zones, in 1 or 2 discrete
Areas, with keypad bus and other optional con-
nections. Kits with the suffix "-V" use the Verizon
network, "A" use the AT&T network.
• IBR-TOUCH-WL Smart 7" Wireless IoT
Touchscreen: Wireless interface touchscreen
with 7" color display. Requires 120VAC electrical
wall outlet for power supply. Dimensions
(WxHxD): 7⅞ x 5⅜ x ⅞ in. (13.7 x 20 x 2.2 cm).
• ISEC-WL-TOUCH Wireless 4.3" Full Color Se-
curity Touchscreen Keypad: 900MHz wireless
interface touchscreen with 4.3" color display. Re-
quires 120VAC electrical wall outlet for power
supply. Dimensions (WxHxD): 5⅜ x 3¾ x 1⅜
inches (13.7 x 9.5 x 3.5 cm).
• ISEC-WL-KEYPAD Wireless Battery-Powered
Standard Keypad: 900MHz wireless interface
with multi-line wide viewing angle ICON display
for system status, "K Style" (STAY/AWAY) key-
pad buttons, battery powered by one CR123 Lith-
ium battery, optional 2
nd
battery for extended life.
Dimensions (WxHxD): 5⅜ x 3¾ x 1⅜ inches
(13.7 x 9.5 x 3.5 cm).
• Optional: Tamper switch spring for the iSecure
Go-Anywhere Hub housing (includes WI2382LF
installation instructions)
• Optional: SEC-2WF-MOD 2-Wire Fire Sensor
Module that supports 2 Fire zones (connect to
Fire Power [+], Zone 7 [‒] and Zone 8 [‒] termi-
nals).
• Optional: StarLink Extended Range Antenna
to increase LTE cellular transmission signal
strength.
• ISEC-CARBON MON Supervised Wireless Car-
bon Monoxide Sensor: A high-quality carbon
monoxide (CO) sensor with built-in supervised
digitally-coded radio transmitter. It is compatible
with Napco's iSecure series supervised receivers
that monitor alarms, restores, low battery, tamper
and status.
• ISEC-DW-XMITTER Low Profile Window/Door
Transmitter: A 1-point low profile window/door
transmitter specially designed for use in iSecure
series wireless systems. When used with the
supplied magnet, the transmitter functions as a
window/door sensor.
• ISEC-GLASSBREAK Wireless Glass-Break
Sensor: An advanced Commercial/Residential
wireless acoustic glass-break sensor designed
for use with Napco iSecure series RECV wireless
receivers. Equipped with a combination normally
Ordering Information