10.5 Loading an Instrument with its default Preset File
The Instrument selector allows you to limit your search to a certain Instrument category, a par-
ticular Instrument, or a specific Bank of the Instrument. You can load an Instrument along
with its default Preset file directly from the Instrument selector in the Library pane. By default
there is no particular selection in the Instrument selector header; it reads All Instruments.
In order to load an Instrument:
1. Click on the Instrument selector header to open it.
⇨ The Instrument selector opens up, showing you all Instruments available in your KOM-
PLETE KONTROL Library.
Browsing the Library
Loading an Instrument with its default Preset File
KOMPLETE KONTROL - Manual - 125
To Next Page
Loading...
