4.4 Connecting Pedals to the Keyboard
The KOMPLETE KONTROL S-Series keyboard provides you two pedal inputs (in the form of
1/4" sockets) on its rear panel: PEDAL A and PEDAL B.
The pedal inputs on the rear panel of the keyboard.
These inputs both allow you to connect either a continuous or a switch pedal in order to further
refine your performance. They can be freely configured for sustain or expression behavior.
Connecting Pedals
►
Connect a continuous or switch pedal to the PEDAL A or PEDAL B inputs on the rear
panel of the keyboard.
Configuring the Pedal Input for a Sustain Pedal
When a switch pedal is connected:
1. Click the MIDI Assignment editor button in the Header to open the MIDI Assignment edi-
tor.
2. Select the control element type PEDALS.
3. Select the pedal input you want to configure, either Pedal A or Pedal B.
Setting up KOMPLETE KONTROL
Connecting Pedals to the Keyboard
KOMPLETE KONTROL - Manual - 27
To Next Page
Loading...
