4. Select Switch from the Mode drop-down menu.
5. Depending on inverted tip/ring connectivity of the pedal, select either Tip or Ring.
→ The pedal input is configured for a switch pedal with sustain behavior. If you need to
change the MIDI Control Change message assigned to the pedal input, refer to ↑8.4, Us-
ing the MIDI Assignment Editor.
Configuring the Pedal Input for an Expression Pedal
When a continuous pedal is connected:
1. Click the MIDI Assignment editor button in the Header to open the MIDI Assignment edi-
tor.
2. Select the control element type PEDALS.
Setting up KOMPLETE KONTROL
Connecting Pedals to the Keyboard
KOMPLETE KONTROL - Manual - 28
To Next Page
Loading...
