►
Turn Knob 3 to select the desired Bank of the Instrument.
→
The Results list only displays the associated Preset files.
10.7 Resetting the Instrument Selection
In order to select another Instrument or show Preset files for all Instruments in your KOM-
PLETE KONTROL Library, you have to reset the Instrument selection:
►
To reset the selection made in the Instrument selector, click the little cross at the right of
the Instrument name:
→
The Instrument selection is reset. The Instrument selector displays the generic label
All Instruments. The TYPES and MODES filters and the Results list under the Instrument
selector now include Preset files for all Instruments.
Browsing the Library
Resetting the Instrument Selection
KOMPLETE KONTROL - Manual - 131
To Next Page
Loading...
