4 Setting up KOMPLETE KONTROL
This section provides basic setup information and guides you through the process of integrat-
ing KOMPLETE KONTROL with supported hosts.
The KOMPLETE KONTROL software is installed both as a stand-alone application as well as a
VST, Audio Unit, and AAX plug-in.
The KOMPLETE KONTROL stand-alone application must be opened once before using
the plug-in within your DAW for the first time, and after installing new Instruments.
The KOMPLETE KONTROL stand-alone application directly communicates with your audio and
MIDI interfaces, which you can configure in the KOMPLETE KONTROL Preferences. When
KOMPLETE KONTROL is used as a plug-in within a host, the communication with your audio
and MIDI interfaces is managed by the host.
For details about the audio and MIDI configuration of the host, and how to load plug-
ins, please refer to its documentation.
Setting up KOMPLETE KONTROL
KOMPLETE KONTROL - Manual - 18
To Next Page
Loading...
