6.3 Control Section
The Control section is located at the center of the KOMPLETE KONTROL S-Series keyboard.
The knobs, buttons, and displays are automatically assigned to parameters of the loaded In-
strument or selected mode. They provide immediate control and allow for deep editing of vari-
ous aspects of KOMPLETE KONTROL.
The controls of the Control section.
(1) Buttons 1-8: The eight buttons dynamically adapt their assignment to the selected mode,
allowing for direct access to the most important functions and sub-sections. The displays show
the current assignment below each button.
(2) Displays: The displays give you information related to the loaded Instrument or selected
mode, and show the functions and parameters assigned to the buttons and knobs.
(3) Knobs 1-8: The eight knobs dynamically adapt their assignment to the selected mode, al-
lowing for direct access to the available parameters. The displays show the current assignment
above each Knob. As the knobs are touch-sensitive, you can tap them to see additional infor-
mation.
Keyboard Overview
Control Section
KOMPLETE KONTROL - Manual - 49
To Next Page
Loading...
