controlled sounds). In this mode, you thus find only one numeric field called Value, defin-
ing the value to be sent when you hit the control element. It goes from 0 to 127 (127 by
default).
▪ Inc: In this mode you can configure the press of a pedal to step through a list of values by
choosing the size of the jump (e.g. 1-2-3-4-5, 2-4-6-8-10 or 3-6-9-12-15), and whether or
not the values wrap around back to the beginning, or stop when they reach their minimum
or maximum.
8.4.8 Assignments for Pedals (Continuous)
For Pedals used as continuous control, the Type menu offers the entries Control Change and
Program Change. Depending on the selected entry, the further available options differ subse-
quently. The following table details the different combinations of options:
Type Menu Value Mode Menu Range Number
Control Change From 0-126 / To 1-127 Number (0-127)
Program Change From 0-126 / To 1-127
MIDI Communication
Using the MIDI Assignment Editor
KOMPLETE KONTROL - Manual - 97
To Next Page
Loading...
Need help?
General
