4. Rotate the LOOP encoder to apply a high-pass or a low-pass filter.
5. Press Stem Selector 1 again to unselect the corresponding Stem Part 1. The Stem Selec-
tor Pad is dim. The Footer in the display diminishes.
When all Stem Parts are selected you can apply
FILTER effects to all Stem Parts simultane-
ously.
Simultaneous Reset of VOLUME and FILTER Settings
In order to reset
VOLUME and FILTER settings on a Stem Part simultaneously:
1. Hold the
SHIFT button to access the Pads secondary functions. The lower row of Pads
now lit white. The Stem Part where volume and
FILTER settings are changed the corre-
sponding pad is dim.
Using Your S5—Getting Advanced
Mixing Stem Files using Stem Decks
TRAKTOR KONTROL S5 - Manual - 127
To Next Page
Loading...
