Native Instruments Traktor Kontrol Z2 User Manual

Cue/Sample Trigger (1-4) Buttons
The Cue/Sample Trigger buttons 1 to 4 for Decks A and C.
The function of the Cue/Sample Trigger buttons depends on the underlying Deck Flavor:
▪ For Track Decks, the four buttons control HotCue/loops 1-4 in primary mode and HotCue/
Loops 5-8 in secondary mode (by default).
You can change the secondary mode behavior in TRAKTOR's preferences in the TRAKTOR
KONTROL Z2 tab, under "Secondary Cue." Here you can determine the behavior for both
Track Decks and Remix Decks. See also ↑6.4, Cue/Sample Trigger Buttons: Optional Sec-
ondary Functions for Track Decks and ↑6.5, Cue/Sample Trigger Buttons: Optional Secon-
dary Functions for Remix Decks.
▪ For Remix Decks, the four Cue/Sample Trigger buttons correspond to the four Sample Slots
in the Remix Deck and control the Mute/Play state of each of the four Slots. If the Remix
Deck is stopped, pressing one of the four buttons starts the Deck and plays the corre-
sponding Sample Slot. When the Remix Deck is playing, pressing one of the buttons will
toggle the Mute/Play state of the corresponding Sample Slot. The Cue/Sample Trigger but-
tons light up with the same color as the currently playing Sample Cell in the Remix Deck.
TRAKTOR KONTROL Z2 Hardware Reference
Top Panel
TRAKTOR KONTROL Z2 - Manual - 47

Native Instruments Traktor Kontrol Z2 Specifications

General

Frequency range	20 - 20000 Hz
Channels quantity	6 channels
Supported sample rates	48 kHz
Digital sound processing	24 bit
AUX in	Yes
XLR out	2
AUX out ports	1
Headphone connectivity	3.5 mm/6.35 mm
Product color	Black
USB connector type	USB Type-A, USB Type-B
AC input voltage	115 - 230 V
Power consumption	750 mA
AC input frequency	50 - 60 Hz
Minimum storage drive space	1024 MB
Mac operating systems supported	Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.15 Catalina
Windows operating systems supported	Windows 10