Getting Started with MAXserver Access Servers
0038
93
The following table lists the factory-default protocol settings:
Table 6 - Default Protocols
Software Load Image Parameter File Dump file
CARD
XMOP
MOP
BOOTP
RARP
DTFTP*
NVS
XMOP
MOP
BOOTP
RARP
XMOP
MOP
BOOTP
RARP
*Not enabled by default.
Software Load Images
The following load image protocols are enabled at the factory.
·
CARD indicates the flash card
·
XMOP indicates another Xyplex loader
·
MOP indicates a VAX/VMS host
·
RARP, BOOTP and DTFTP indicate UNIX hosts.
Each initialization record has several loading and dumping protocols
enabled by default if the access server attempts to obtain software and
parameters from the network.
Enabling/Disabling Image Loading Protocols
The unit displays the following prompt:
Enable ALL methods for image loading (Y,N) [N]?
To Next Page
Loading...