EasyManua.ls Logo

NCR 7167 - Page 240

NCR 7167
344 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7167 Owner’s Manual Chapter 6: Commands
November 2003
227
Compression Mode FS ( g pL pH fn m n (when fn = 50)
This command sets the compression method and the file transmission format for the image data.
ASCII FS ( g pL pH fn m n
Hex 1C 28 67 pL pH fn m n
Decimal 28 40 103 pL pH fn m n
Range pL + pH x 256 = 3 (pL =3, pH = 0)
fn = 50
m = 48, 49
n = 48, 49, 50 (when m = 48)
n = 48, 49 (when m = 49)
Default m = 49, n = 48
m Compression Method N File Transmission
Format
48 TIFF format
48 No Compression 49 BMP format
50 Raw data
48
TIFF format
B&W Gray scale
49
Compress ON, if B/W
mode, compress use
CCITT (Group 4); if 8-
bit gray scale mode, use
JPEG algorithm
49
N/A JPEG
format
Deletes Cropping Area FS ( g pL pH fn n (when fn = 56)
The defined cropping area n is deleted
ASCII FS ( g pL pH fn n
Hex 1C 28 67 pL pH fn n
Decimal 28 40 103 pL pH fn n
Range (pL + pH x 256) = 2 (pL =2, pH = 0)
fn = 56
0 <
n < 10
N = 0 deletes all cropping areas.
After the cropping area is deleted the area number n is cleared.

Table of Contents

Related product manuals