CHAPTER
1
BenchMike Pro 2025/2050 & Z-Mike Pro 4025/4050 Instruction Handbook: Introduction 1-1
1 Introduction
1.1 BenchMike Pro Options
The Model 2025 BenchMike Pro covers the measurement range 0.003-1.00 inch, and the Model 2050 BenchMike
Pro covers the measurement range 0.010-2.00 in. There are five types of optional BenchMike Pro equipment.
1.1.1 Laser Beam Options
There are wide beam options for all BenchMike Pro models which permit the measurement of rough surfaces. A
small spot size option is also available for the Model 2025 to measure small diameters and part features down to
0.001 inch (25.4 µm).
1.1.2 Interfaces
The following input and output interfaces are ordered as options to the standard BenchMike Pro, allowing you to
customize your micrometer to your specific needs: 8 digital inputs and 12 digital outputs, 1 stepper motor port, a
second quadrature encoder input, and footswitch input.
1.1.3 Accessories
Accessories to the BenchMike Pro include footswitch, and dust cover.
1.1.4 Measurement Fixtures
Work holding fixtures such as universal slides, v-blocks, adjustable centers, leadscrew positioners, rotary chucks,
concentricity fixtures, and positioning tables are available for the BenchMike Pro, as described in the Workholding
Fixtures section.
To Next Page
Loading...
Need help?
General
