BenchMike Pro 2025/2050 & Z-Mike Pro 4025/4050 Instruction Handbook: Introduction 1-7
1.6.1 Output Beam Data
1.6.1.1 Z-Mike Pro
Radiant Power: Less than 1 milliwatt
Wavelength: 632.8 nm (only)
1.6.1.2 BenchMike Pro
Radiant Power: 1 milliwatt
Wavelength: 635 nm (only)
1.6.2 Warning Information
The BenchMike Pro is equipped with a warning label as a reminder that a laser is present during operation.
If a problem occurs with the operation of the BenchMike Pro, contact NDC Technologies Customer Service im-
mediately.
Only trained NDC Technologies service personnel should perform service operations on this product. The use of
controls or adjustments or the performance of procedures other than those specified in this manual may result in
hazardous radiation exposure.
See also the safety warnings at the beginning of this handbook.
To Next Page
Loading...
