4-38 BenchMike Pro 2025/2050 & Z-Mike Pro 4025/4050 Instruction Handbook: Setup
The Actual Pressure displays the part pressure as entered by
the user. When Thermal Compensation is enabled, this value
affects the measurement.
The Barometric Temperature displays the barometric temper-
ature as entered by the user. When Thermal Compensation is
enabled, this value affects the measurement.
4.12 Save Function
You can save your changes to memory by selecting Setup
Save or Setup Library Save. You will be asked to con-
firm this decision to save all changes.
If you make changes to the setup of the BenchMike Pro but fail
to save the data to memory, the title block on the top of the
screen will have a red background and remain red until you
have saved the settings.
If the BenchMike Pro is powered down in this state, all changes
not saved will be lost.
To Next Page
Loading...
Need help?
General
