BenchMike Pro 2025/2050 & Z-Mike Pro 4025/4050 Instruction Handbook: Setup 4-21
4.8.4 Fixture Batch Report
The Fixture Batch Report is a companion report to the Fixture Sample Report shown on the previous page. It
summarizes the statistical results for all the measured parts.
Note: A maximum of 31 characters is permitted in the Title (shown as “Your Information Here”) line.
Your Information Here Fixture Batch Report
Library 03/Untitled/F01 10/21/2017 8:40a Page 1 of 1
Mode: Diameter, Units:Inches(in)
Report on All Readings
Average 0.355690
Std Dev 0.0036261
Highest 0.362025
Lowest 0.350075
Range 0.011950
Oversize 0
Undersize 0
Report on Sample/Part Summaries
Average 0.355616
Std Dev of Sample Averages 0.0001111
Highest Sample Average 0.355699
Lowest Sample Average 0.355490
Highest-Lowest Sample Average 0.000209
Average Range/R-Bar 0.010957
Oversize Samples 0
Undersize Samples 0
Total Number of Samples 8
To Next Page
Loading...
Need help?
General
