User Guide
134
www.nec-computers.com
Notes:
■ WebBIOS can set BGI Rate (Background Initialize Priority)
whereas the Universal RAID Utility cannot.
■ The Universal RAID Utility can set an Initialization Priority,
but it can't set it to the LSI Embedded MegaRAID. Therefore,
the Universal RAID Utility doesn't display the [Initialization
Priority] in the RAID Controller properties. Changing the Ini-
tialization Priority by raidcmd command will also fail.
Low 10
Patrol Read Priority
Patrol Read Rate (WebBIOS)
High 90
Middle 50
Low 10
Consistency Check Priority
Consistency Check Rate (WebBIOS)
High 90
Middle 50
Low 10
Table 29: Settings Levels and Values
Item Setting level of
Universal RAID
Utility
Setting value
To Next Page
Loading...