User Guide
157
www.nec-computers.com
8. Locate the DIMM socket of your choice and make sure the clips at both ends of
the socket are pushed outwards to the open position.
9. Push the DIMM straight into the socket.
Note: Make sure of the orientation of the DIMM.
Position the DIMM so that a notch in the bottom edge of the
DIMM aligns with the keyed socket. Applying too much
pressure can damage the socket. Keyed DIMMs insert only one
way.
Caution
To avoid damaging the socket, do not apply excessive force
while pressing the DIMM.
The levers automatically close when the DIMM is inserted into the socket.
Figure 109: Inserting the DIMM in the Socket
A: Key Slot
B: Key
10. Reinstall the processor duct.
Note: Place the internal USB cable onto the processor duct.
A
B
A
B
To Next Page
Loading...