User Guide
40
www.nec-computers.com
3. The rails lock with a clicking sound. Pull the release levers on the left and right
sides of the server toward direction indicated by an arrow (white) in the figure,
and remove them from the server while unlocking it.
Figure 11: Removing the Rails
Pull the release lever toward the direction shown
by the arrow (white) to remove the rail.
4. Only the inner rails remain screwed to the server when the rail assemblies have
been removed.
Figure 12: Inner Rails on the Server
A: Inner rails
5. Push the levers, and move the removed rail assemblies toward the direction
indicated by an arrow in the figure, to restore the original position.
Figure 13: Folding the Rail Assemblies
A
To Next Page
Loading...