NEC iPasolink 200 - Page 105

CABLE TERMINATION 6-17
Installation NWD-107460-02E
3 Remove of braided wire, insulator.
(1) The insulator and an aluminum tape are cut along an end face of turned up
braided wire.
Note Do not damage the braided wire and the center conductor.
(2) The braided wire is cut according to flange of clamp.
Tools
• cutter
•nipper
Alminum tape
Center conductor
Braided wire
Flange
1)
2)
Aluminum tape
Submission Prohibited
NEC Internal Use Only