ANTENNA ORIENTATION 10-7
Installation NWD-107460-02E
Elevation Angle Adjustment
B-4 Loosen bolt(s) (3 in Fig. 10-3),
B-5 Adjust the elevation angle by adjusting the nuts (4 in Fig. 10-3),
B-6 Secure nut loosened in step B-1,
B-7 Secure nuts loosened in step B-4.
Fig. 10-3 Location of Adjusting Nuts and Bolts (RFS SB1 type bracket)
C. USING RFS C-Mount TYPE BRACKET
Azimuth Angle Adjustment
C-1 Loosen three bolts (1 in Fig. 10-4),
C-2 Adjust azimuth angle by adjusting bolt (2 in Fig. 10-4),
C-3 Secure nuts loosened in step C-1,
Elevation Angle Adjustment
C-4 Loosen four bolts (3 in Fig. 10-4),
C-5 Adjust elevation angle by adjusting bolt (4 in Fig. 10-4),
C-6 Secure bolts loosened in step C-4.
1. Loosen for adjusting azimuth
2. Adjust azimuth
3. Loosen (1/4 TURN) bolts for adjusting elevation
0.3
φ m Antenna
4. Adjust elevation
Submission Prohibited
NEC Internal Use Only
To Next Page
Loading...
