NEC iPasolink 200 - Hybrid Assembly; Polarization Coarse Alignment

5-24 ODU MOUNTING
NWD-107460-02E Installation
[B] 7/8 GHz Hybrid
This Hybrid/coupler is designed to be attached to 0.6 to 1.8 m antennas with interface
for direct mounting of ODU.
1 Hybrid assembly
Note Tightening torque is 3.0 N·m ±10%.
2 Polarization coarse alignment
Support
Spring Washer M5 (8ea.)
Hexagon Socket
Head Cap Screw
M5 x 14 (8ea.)
Hybrid
V Polarization H Polarization
Cross-Recessed
Head Machine Screw
M2.6 (2ea.)
(Shipment condition)
Submission Prohibited
NEC Internal Use Only