NEC iPasolink 200 - For Waveguide Connection; 10-38 Ghz ODU MOUNTING BRACKET INSTALLATION

ODU MOUNTING 5-49
Installation NWD-107460-02E
5.2.2 For Waveguide Connection
10-38 GHz ODU MOUNTING BRACKET INSTALLATION
This Mounting Bracket is designed in order to install 10-38 GHz ODU with antenna
direct mount interface to a pole. The diameter of the pole is from 48.5 to 114.3
millimeters.
SS: Stainless Steel
Note Tightening torque is 4 N·m ±10% (M6 Screw).
Tightening torque is 11 N·m ±10% (M8 Screw)
Table 5-7 Mounting Bracket Parts List
Item Description Q’ty
1 Bracket (with Adapter) 1
2 Holder-1 (with two M6 taps) 2
3 Holder-2 2
4 M8 Stud Bolt (SS) 4
5 M8 Hexagon Nut (SS) 20
6 M8 Flat Washer (SS) 8
7 M6×16 Hexagon Socket Head Screw (SS) 4
8 M6 Spring Lock Washer (SS) 4
9 M6 Flat Washer (SS) 4
10 Cap 4
11 O-Ring (for ODU) 1
12 O-Ring (for Waveguide) 1
13 Screw of Waveguide Connecting
for 10/11 GHz M4×14 Hexagon Head Screw with Washer (SS)
for 13/15 GHz M4×12 Hexagon Head Screw with Washer (SS)
for 18/23/26/28/32/38 GHz M3×10 Hexagon Head
Screw with Washer (SS)
8
4
4
Mounting Bracket
Submission Prohibited
NEC Internal Use Only