5-64 ODU MOUNTING
NWD-107460-02E Installation
5.3.2 Rack Mounting
For the antenna direct mounting type ODU, rack mounting installation is explained in
following procedure.
1 Fix the ODU rack mounting bracket into the 19-inch rack using the six fixing
bolts,
2 Mount the ODU onto the bracket and tighten the four fixing bolts (M6) on the
ODU,
Note The tightening torque is 4.0 N·m ±10%.
Bolt
Spring washer
Flat washer
19-inch rack
ODU mounting bracket
Flange adaptor
Submission Prohibited
NEC Internal Use Only
To Next Page
Loading...
