ODU MOUNTING 5-3
Installation NWD-107460-02E
5.1 Antenna Direct Mounting
5.1.1 Basic Installation for Antenna & ODU
Note The details are referred to the installation manual which is attached to
the antenna.
Installation of Bracket
1 Install the bracket to the antenna pole,
2 Mount antenna to the bracket,
ANDREW Pole Mount Bracket
for other reflector type
Washer
Note * Tightening torque of 22 N·m for M10.
Three(3) screws*
(Apply screwtight to threads
before fitting to antenna)
Nut*
Protective cap
Lock washer
ANDREW Pole Mount Bracket
for 1 or 2 ft reflector type
Lock washer
Washer
Nut
Clamp Bracket
Submission Prohibited
NEC Internal Use Only
To Next Page
Loading...
