5-8 ODU MOUNTING
NWD-107460-02E Installation
3 Fix the ODU to the bracket by tightening the M6 screws (four locations),
Notes
1. Being careful, tighten alternately and gradually four screws.
2. Figure shows V polarization.
3. Be careful not to damage the O-ring (Antenna).
4. The tightening torque is 4.0 N·m ±10%.
O-ring
Hole for guide pin
ANDREW VHLP Type Bracket
ODU(6-11 GHz)
ODU(13-38 GHz)
Submission Prohibited
NEC Internal Use Only
To Next Page
Loading...
