5-22 ODU MOUNTING
NWD-107460-02E Installation
Demounting from Hybrid/Coupler
1 Loosen the four (or six) bolts fixed the ODU,
2 Then demount the ODU.
Note When demounting the ODU from Hybrid/Coupler, mount the attached
SHORT PLATE to the demounted port of the Hybrid/Coupler to avoid RF
power leaking from the hybrid/coupler and for waterproofing.
Note Tightening torque is 3.0 N·m ±10%.
Mounting Short plate to the
ODU port
Mounting hole for
Short plate
Short plate
Submission Prohibited
NEC Internal Use Only
To Next Page
Loading...
