NEC SL1000 - Figure 2-100 Removing the CPU Card; Figure 2-101 Installing the PZ-VM21 PCB

4. Press tab A and lift the CPU support bracket. Remove the CPU card.
CPU support
CPU card
408M-A1 at 1632M KSU
A
Figure 2-100 Removing the CPU Card
5. Connect the PZ-VM21 daughter board to the J6 connector using four Nylon-spacers on the CPU
card.
CPU card
J6
PZ-VM21 PCB
CN1
Nylon-spacers
Nylon-spacers
Figure 2-101 Installing the PZ-VM21 PCB
SL1000
ISSUE 3.0
2-70 Installation