NEC SL1000 - Figure 2-39 Bases and Support of the Battery Box; Figure 2-40 Floor-Mount Spacing Guide

1. Assemble the FM/WM Base-F, Base-R and WM Support.
WM Support
FM/WM Base-R
FM/WM Base-F
Figure 2-39 Bases and Support of the Battery Box
2. Refer to Figure 2-40 Floor-Mount Spacing Guide on page 2-28 for required spacing before
drilling holes for 10 mm (0.394″) anchor bolts (locally procured).
Mark and drill the four holes required to install the FM/WM Base.
3. Using anchor bolts, secure the FM/WM Base to the floor.
Four Anchor bolts
M10 mm (0.394 )
Front side
Front side
: Maintenance space
Wall
1
5
0
m
m
(
5
.
906
 )
150 mm
(5.906)
46
0
m
m
(
1
8
.
11
0
 )
460 mm (18.110)
AC inlet
side
AC inlet
side
500 mm (19.685)
190 mm
(7.480)
Anchor bolt location
Figure 2-40 Floor-Mount Spacing Guide
SL1000 ISSUE 3.0
2-28 Installation