NEC SL1000 - Figure 2-113 Wall-Mount Screw Guide; Figure 2-114 Mounting the Multiline Telephone; Figure 2-112 Hook-Switch Hanger

2. Remove the switch-hook from the unit. Turn the tab toward the top. Then slide the hook-switch
into position. Refer to Figure 2-112 Hook-Switch Hanger on page 2-77.
Hook-switch hanger Hook-switch hanger
Figure 2-112 Hook-Switch Hanger
3. Install two screws into a wall. The screw heads must be remained about 3 mm (0.12″).
7 - 9.5 mm
(0.28 - 0.37)
83.5 mm
(3.287)
Minimum 10 mm (0.39)
3 - 4 mm
(0.12 - 0.16)
1 - 3 mm
(0.04 - 0.12)
Figure 2-113 Wall-Mount Screw Guide
4. Mount the telephone on the wall.
Wall-mounting
holes
Wall side
Figure 2-114 Mounting the Multiline Telephone
ISSUE 3.0
SL1000
Hardware Manual 2-77