NEC SL1000 - Cable Routing and Clamping; Figure 2-24 Cabling; Figure 2-25 Sub-Cover

1.6.6 Cable Routing and Clamping
1. Depending on cabling requirement, select either a right or left route. Clamp and route cable to
outside.
Cables
Cable clamp
Figure 2-24 Cabling
2. Cut and remove the Plastic Knockouts as needed from the Sub-Cover.
Sub-Cover
Plastic Knockouts
Figure 2-25 Sub-Cover
3. Replace the Sub-Cover.
ISSUE 3.0 SL1000
Hardware Manual 2-19