NEC SL1000 - Figure 2-94 Installing the CPU Card; Figure 2-95 Removing the Plastic Knockout and Replacing the Main-Cover

6. Reinstall the CPU card into the 408M-A1 mother board, and close the CPU Support making sure
tab A locks into place.
CPU support
CPU card
408M-A1 at 1632M KSU
Figure 2-94 Installing the CPU Card
7. Cut and remove the Plastic Knockout for VoIP connector, then replace the Main-Cover and fasten
two screws.
Two screws
Main-Cover
Plastic
Knockout
Hooks
Figure 2-95 Removing the Plastic Knockout and Replacing the Main-Cover
SL1000
ISSUE 3.0
2-66 Installation