6. Reinstall the CPU card into the 408M-A1 mother board, and close the CPU Support making sure
tab A locks into place.
CPU support
CPU card
408M-A1 at 1632M KSU
Figure 2-102 Installing the CPU Card
7. Replace the Main-Cover and fasten two screws.
Two screws
Hooks
Main-Cover
Figure 2-103 Replacing the Main-Cover
4.4 Installing the CF Card (CFVRS/CFVMS/CFVML)
• Do not remove or install the CPU Card with the power on.
• If Expansion KSU(s) are installed, turn the power on/off in the order of
Expansion 3 KSU, Expansion 2 KSU, Expansion 1 KSU and then Main
KSU.
• When installing a compact flash card onto the PZ-VM21 the system MUST
be powered off. Never install or uninstall the compact flash card while the
system is under power.
1. Turn off the system power and disconnect AC cord.
ISSUE 3.0
SL1000
Hardware Manual 2-71