NEC SL1000 - Cards; General; Unpacking; Table 2-8 Expansion Cards

SECTION 3 INSTALLING THE EXPANSION INTERFACE CARDS
3.1 General
Up to three expansion interface cards can be installed per KSU.
Table 2-8 Expansion Cards
Expansion Interface
Card
Description Note
IP4WW-408E-A1 4 analog trunks and 8 hybrid extensions card
IP4WW-008E-A1 8 hybrid extensions card
IP4WW-000E-A1 0 trunk/extension card for ISDN BRI
IP4WW-2BRIDB-C1 2 Euro-ISDN BRI daughter board (Mount on the 008E-A1 or 000E-A1)
IP4WW-1PRIU-C1 1 Euro-ISDN PRI (E1 for Latin America) card
The 408E-A1, 2BRIDB-C1 or 1PRIU-C1 should not be installed into the 3rd
Expansion KSU. The 3rd Expansion KSU does not support any trunks.
• The function of IP4WW-000E-A1 card is just a mounting card for the 2BRIDB.
• The 2BRIDB-C1 can be installed in following combinations;
Daughter Board
Option Unit
408M-A1 408E-A1 008E-A1 000E-A1
2BRIDB-C1 No No Yes Yes
3.2 Unpacking
Unpack the 408E-A1/008E-A1/000E-A1/2BRIDB-C1/1PRIU-C1 and check it against the following list.
Inspect for physical damage.
Table 2-9 Expansion Card Packing List
Items List of Contents QTY
IP4WW-408E-A1 408E-A1 PCB (with PKG Spacer) 1
Nylon Spacers 2
Metal Spacers 2
Screws (with circular washer) 2
IP4WW-008E-A1 008E-A1 PCB (with PKG Spacer) 1
Nylon Spacers 2
Metal Spacers 2
Screws (with circular washer) 2
IP4WW-000E-A1 000E-A1 PCB (with PKG Spacer) 1
Nylon Spacers 2
Metal Spacers 2
Screws (with circular washer) 2
SL1000 ISSUE 3.0
2-42 Installation