NEC SL2100 - Page 79

Item
No.
Item Input Data Description Default Related
Program
27 Handset Volume 0 = Back to Default
(Back)
1 = Stay at previous
level (Stay)
Determine how an extension hand-
set volume is set after it is adjusted
during a call.
When 1 is assigned in this pro-
gram and a user sets the volume
to maximum, the volume is reset
to a level to meet FCC standards
when the user hangs up.
1
28 Message Waiting
Lamp Color
0 = Green
1 = Red
Determine whether an extension
Message Waiting Lamp lights Green
(0) or Red (1) when a message is
received.
1
29 PB Back Tone
Level
1 ~ 57 (- 15.5 dB ~
+ 12.5 dB)
This program allows adjustment of
the PB Back Tone Level when you
are calling an ISDN Line.
32 (0 dB)
30 Toll Restriction
Class
0 = Virtual Extension
(Follows virtual exten-
sion Toll Class in PRG
21-04.)
1 = Real Extension
(Follows physical sta-
tions Toll Class in PRG
21-04.)
Select the Toll Restriction Class to
use when placing a call from a virtu-
al extension.
1 15-02-21
34 Call Register
Mode
0 = Trunk Mode
1 = Extension/Trunk
Mode
The Caller ID Scroll stores Trunk
calls only (0), or both Internal and
Trunk calls (1).
0
35 Message Waiting
Lamp Cycle for
Calling Exten-
sion
1 = Cycle 1
2 = Cycle 2
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
Select the cycle method that the
Large LED flashes when the exten-
sion has set Message Waiting.
3
36 Message Waiting
Lamp Cycle for
Called Extension
1 = Cycle 1
2 = Cycle 2
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
Select the cycle method that the
Large LED flashes when the exten-
sion has Message Waiting set to the
extension.
2
37 Voice Mail Mes-
sage Wait Lamp
Color
0 = Green
1 = Red
Select the color of the Large LED
when a voice mail message is wait-
ing at the extension.
1
38 Voice Mail Mes-
sage Wait Lamp
Cycle
1 = Cycle 1
2 = Cycle 2
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
Select the cycle method that the
Large LED flashes when the exten-
sion has a VM Message Waiting set
to the extension.
2
40 Additional Dial
for Caller ID Call
Return
Up to four digits (0, 1 ~
9, #,
*
)
Enter the digits to be dialed in front
of the Caller ID when using the Call-
er ID Return function.
No Setting
41 Incoming Ring
Setup
0=Speaker Normal
Ring
1=Headset Ring
0 11-11-37
11-11-62
15-02-12
15-02-42
20-13-06
42 Incoming Off-
Hook Ring Setup
0=Speaker Off-Hook
Ring
1=Headset Off-Hook
Ring
0 11-11-37
11-11-62
15-02-12
15-02-41
ISSUE 1.0 SL2100
ACD Installation Manual 4-13
Program
15