NEC SL2100 - Page 82

Program/Item
No.
Description/
Selection
Assigned Data Comments
84-14-10 SIP Trunk Basic Information
Setup – URL Type
0 = SIP-URL
1 = TEL-URL
Default is 0
Select SIP Profile 1-6.
84-14-11 SIP Trunk Basic Information
Setup – URL/To HeaderSetting
Information
0 = Proxy Server Domain
1 = SIP UA Domain
Default is 0
Select SIP Profile 1-6.
84-14-15 SIP Trunk Basic Information
Setup – 100rel Settings
0 = Use Default Settings (100rel in-
cluded)
1 = Use Opposite Settings (100rel
not included)
Default is 0
Select SIP Profile 1-6.
6.8 SIP Server Information Setup
Program/Item
No.
Description/
Selection
Assigned Data Comments
10-29-01 SIP Server Information Setup –
Default Proxy (Outbound)
0 = Off
1 = On
Default is 0
Select SIP Profile 1-6.
Define the SIP Proxy setup, De-
fault Proxy (Outbound).
When SIP trunking is used, this
must be on.
If entries are made in Program
10-29-xx for a SIP Server and the
SIP Server is then removed or
not used, the entries in Program
10-29-xx must be set back to
their default settings. Even if
10-29-01 is set to 0, the NEC
SL2100 still checks the settings
in the remaining 10-29 programs.
10-29-02 SIP Server Information Setup –
Default Proxy (Inbound)
0 = Off
1 = On
Default is 0
Select SIP Profile 1-6.
Define the Default Proxy (in-
bound).
10-29-03 SIP Server Information Setup –
Default Proxy IP Address
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.225.255.254
Default is 0.0.0.0
Select SIP Profile 1-6.
Enter the default Proxy IP Ad-
dress if the SIP carrier is using an
IP Address for the Proxy. In most
cases, this is left at the default
entry as the domain name is
used.
10-29-04 SIP Server Information Setup –
Default Proxy Port Number
0 ~ 65535
Default is 5060
Select SIP Profile 1-6.
Define the Proxy Port Number.
10-29-12 SIP Server Information Setup –
Proxy Domain Name
64 characters maximum
Default not assigned
Select SIP Profile 1-6.
Define the Proxy Domain Name
(NEC SL2100 domain name).
SL2100 ISSUE 1.0
7-14
SIP Trunking