EasyManuals Logo

Ness D8X Installation & Programming Manual

Ness D8X
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
FOLLOW ME TELEPHONE NUMBER
The Follow Me telephone number is only used in Audible Dialling mode. (If P86E 3E,
4E, 5E or 6E are on).
The Follow Me telephone number can be programmed in User Program Mode. If

ignored.
IF P86E 3E or 4E ARE ENABLED (AUDIBLE MONITORING)

ignored.
IF P86E 5E or 6E ARE ENABLED (CONTACT ID + AUDIBLE)

to the central station. The message is also repeated in audible format to the telephone
number (if any) programmed at P00E.
PROGRAMMING SEQUENCE:
P00E existing telephone number is displayed one digit at a time
[ENTER NEW TELEPHONE No] E new telephone number is displayed one digit at a time
P00E
PROGRAM MODE LEVEL
User, Installer mode or NessComms.
FACTORY DEFAULT
No telephone numbers.
NOTES

disabled, all audible format calls are made

RELATED OPTIONS
P86E 3E Audible DTMF format.
P86E 4E Audible Pulse format.
P86E 5E Contact ID + Audible DTMF.
P86E 6E Contact ID + Audible Pulse.
TELEPHONE NUMBERS 1 & 2
The panel can dial up to 2 phone numbers when an event is to be transmitted to a
central monitoring station or other location. Telephone numbers may be up to 30 digits
in length.
PROGRAMMING SEQUENCE:
P70E existing telephone number is displayed one digit at a time
[ENTER NEW TELEPHONE No] E new telephone number is displayed one digit at a time
EXAMPLE: To program Telephone No.1 to be 03 1234 1234:
P 70 E 0312341234 E
TO CLEAR A TELEPHONE NUMBER
To clear a telephone number, enter the MEMORY key in place of the telephone number.
Example, to clear a Telephone Number 1 press: P70E MEMORY E
P70E, P71E
PROGRAM MODE LEVEL
Installer mode or NessComms.
FACTORY DEFAULT
No telephone numbers.
NOTES

calls are made on telephone number 1
and the setting of P87E 1E has no effect.

test calls are made on telephone number


number display sequence.
RELATED OPTIONS
P87E 1E Alternate Primary/Secondary
telephone numbers.
P86E 1E Disable dialler (still allows
remote up/download if programmed).
Option No. Description Default
P00E FOLLOW-ME TELEPHONE NUMBER - For audible dialling
P70E TELEPHONE NUMBER 1 - PRIMARY
P71E TELEPHONE NUMBER 2 - SECONDARY
P80E TELEPHONE NUMBER 3 - TEST CALLS
P81E TELEPHONE NUMBER 4 - CALLBACK FOR UPLOAD
P72E ACCOUNT NUMBER 1 0000
P73E ACCOUNT NUMBER 2 0000
SPECIAL CHARACTERS (Applies to all telephone Numbers)
If required, pauses, * (star) or # (hash) VF digits can be included in the dialling
sequence by using the keys in the table below.
SPECIAL CHARACTER KEY ENTRY KEYPAD DISPLAY
PAUSE (1.6sec) ARM Key 12
* (Star) HOME Key 10
# (Hash) EXCLUDE Key 11
38
Ness D8x / D16x Control Panel – Installation Manual
PROGRAMMING

Table of Contents

Other manuals for Ness D8X

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ness D8X and is the answer not in the manual?

Ness D8X Specifications

General IconGeneral
BrandNess
ModelD8X
CategoryControl Panel
LanguageEnglish

Related product manuals