Ness D8X - Area2 Disarm by Keyswitch Allowed; Entry Delay Extender

P120E 7E
Available in D8x/D16x V5.6 and later.
RELATED OPTIONS
P26E Entry Delay Time1.
P120E 8E
Available in D8x/D16x V5.6 and later.
RELATED OPTIONS
P60E 2E, 3E. P120E 1E, 4E, 5E.
ENTRY DELAY EXTENDER
Increases the Entry Delay Time1 by a factor of 10. Example, if P26E is programmed for
30 sec, it becomes 300 sec. (Entry Delay Time2 is unaffected).
OFF: Normal Entry Delay Time. (Factory default). ON: Entry Delay Multipled by 10.
AREA2 DISARM BY KEYSWITCH ALLOWED
This option allows the keyswitch (if enabled) to disarm Area2. Note, the keyswitch

OFF: Option Disabled. (Factory default). ON: Option Enabled.
57
Ness D8x / D16x Control Panel – Installation Manual
PROGRAMMING