Ness D8X Installation & Programming Manual

AUX3 OUTPUT OPTIONS
P147E
AUX3 PULSE TIME
Available in D8x/D16x V6 and later.
PROGRAM MODE LEVEL
Installer mode or NessComms V5.3
or later.
FACTORY DEFAULT
20 sec.
RELATED OPTIONS
P143E 8E
Sets the length of pulse time for the AUX3 output when the P143E 8E option is selected.
Select 1 to 99 seconds.
TO PROGRAM
Press P147E (The existing Pulse Time will be displayed).
Press [NEW TIME] E (The new Pulse Time will be displayed).
P143E 1E – 8E
ENHANCED AUX3 OUTPUT OPTIONS
Available in D8x/D16x V6 and later.
PROGRAM MODE LEVEL
Installer mode or NessComms V5.3
or later.
FACTORY DEFAULT
All off.
NOTES
Any or all options may be selected on.
The P143E enhanced AUX3 options work along with P123E and AutoTimers to provide
multiple choices of events and alarms to control AUX3.
TO PROGRAM
1. Press P143E.
2. Press 1E ... 8E to turn an option on. Multiple options can be selected.
P143E 1E
AREA1 ARMED TO AUX3
Turns on AUX3 while Area 1 is armed.
P143E 2E
AREA2 ARMED TO AUX3
Turns on AUX3 while Area 2 is armed.
P143E 3E
HOME ARMED TO AUX3
Turns on AUX3 while armed in Home mode.
P143E 4E
KEYPAD TOGGLE AUX3
When this option is on,
AUX3 is turned ON or PULSED with the keypress 33* (* = Left hand STAR button).
AUX3 is turned OFF with the keypress 33# (# = Right hand STAR button).
P143E 5E
TELEPHONE REMOTE CONTROL OF AUX3
NOTES
Remote operation by telephone
procedure as detailed in the user and
installation manuals must be followed
before access is allowed. This includes
entering a valid user code.
RELATED OPTIONS
P90E 5E, Enable remote Aux control.
When this option is on,
AUX3 is turned ON or PULSED with the telephone keypress 33*
AUX3 is turned OFF with the telephone keypress 33#
FEEDBACK TONES HEARD BY PHONE:
3 BEEPS: The AUX has been turned ON or is already ON.
1 BEEP: The AUX has been turned OFF or is already OFF.
1 LONG BEEP: Error. Remote AUX operation by telephone is not enabled.
P143E 8E
PULSE AUX3
RELATED OPTIONS
P147E, AUX3 Pulse Time.
This option converts the P143E 1E, 2E, 3E, 4E, 5E options into a pulsed AUX3 output.
AUX3 is pulsed on for the time set in P147E.
Option No. Description Default Note
P147E AUX3 PULSE TIME 20 sec 1 to 99 seconds
63
Ness D8x / D16x Control Panel – Installation Manual
PROGRAMMING

Ness D8X Specifications

General

Brand	Ness
Model	D8X
Category	Control Panel
Language	English