INSTALLATION GUIDE
3. UPON RECEIVING YOUR FIREWALL
3.2.1 The chassis
Flexible feet have been placed under the chassis of the firewall to ensure that the NETASQ firewall
is on a stable plane (on a desk or on other IT equipment) and is protected from scratches.
These feet are delivered separately for 1U models (products that can be installed on a desk or in a
rack), ie, U120, U250, U450, U1100 and U1500.
These feet can be delivered already installed on the appliance for non-rackable products (U30 and
U70).
U6000, NG1000-A and NG5000-A appliances are delivered with racking rails (sliding rails) in
addition to front attachment brackets. These rails have to be set up on prder to prevent
deterioration of the product.
3.3 Warranty and dismantling the appliance
WARNING
Under no circumstances should you take apart a NETASQ appliance on your own. Only
NETASQ and its approved maintenance agents are authorized to do so. Your warranty will be
rendered null and void should you dismantle a NETASQ firewall on your own.
To Next Page
Loading...
