INSTALLATION GUIDE
3. UPON RECEIVING YOUR FIREWALL
3.1.3 Firewall seal
A seal label is pasted on all firewalls. This prevents the replacement or modification of the firewall’s
hardware elements. This label has the peculiarity of displaying a message (VOID) that cannot be
erased once the label has been removed. There are two types of seal: one pasted by NETASQ
after production and one pasted by your partner if a maintenance operation has been performed on
your appliance (your partner would have explained this maintenance operation to you through an
activity certificate).
Figure 6: Firewall seal
Confirm that these security mechanisms are in place in order to ensure the integrity of the product
delivered as well as any subsequent dispute concerning the application of the guarantee in the
event a breach has been observed more than 48 hours after receipt of the product. Feel free to
contact your distributor if any of the elements does not comply with its description.
3.2 Contents of the packaging
Keep the cardboard packaging safely in case you need it later for transporting the firewall. It has
been designed to give your NETASQ firewall optimum protection (shock and temperature
resistance).
Upon delivery, check that the following have been included in the packaging
The NETASQ firewall in the model ordered
A power cable (2 cables for U6000, NG1000-A and NG5000-A appliances) (ref.
1076036). For U30 and U70 products, the cable would be a power cable specific to the
power supply unit (plug attached to the unit).
A crossover DB9F serial cable (ref. 1076033) (optional)
An RJ 45 crossover cable (blue cable, ref. 1076034)
The NETASQ software suite CD-ROM (Administration Suite)
A sheet indicating the license agreement.
Brackets and fastening system for racking your firewall (except for U30 and U70)
The power pack for U30 and U70.
Rubber feet for IU products (U120, U250 et U450)
If any of the elements is missing, contact your distributor immediately.
NOTE
For an after-sales exchange, the package will only contain the product and the external
power supply unit (U30, U70).
To Next Page
Loading...
