INSTALLATION GUIDE
3. UPON RECEIVING YOUR FIREWALL
Version number label: this label, pasted ion the packaging, indicates the software version
installed on the firewall. The version is defined by a version number and model (which correspond
to a certain export zone). This label helps to check later if the delivered version has been certified.
Figure 3: Product version label
3.1.2 Quality seal
Every firewall is delivered in a cardboard box on which a NETASQ-specific quality seal or a
“NETASQ QUALITY SEAL” is affixed. Check that there is such a seal on your product’s
packaging.
Below is the type of label or quality seal that you should expect to find:
Figure 4: "Quality seal" label
Figure 5: Warranty band
If this band is missing, contact your distributor soonest possible to find out why the packaging has
been opened.
Confirm that these security mechanisms are in place in order to ensure the integrity of the product
delivered as well as any subsequent dispute concerning the application of the guarantee in the
event a breach has been observed more than 48 hours after receipt of the product. Feel free to
contact your distributor if any of the elements does not comply with its description.
To Next Page
Loading...
