You are strongly advised to read this document in full before installing any NETASQ UTM product.
This guide aims to facilitate the quick integration of a NETASQ firewall into your network, but does
not provide information on how to configure it. Please consult the relevant help file on the CD-
ROM provided for configuration matters.
Copyright © NETASQ 2013. All rights reserved.
Any reproduction, adaptation or translation of this current document without prior written
permission is prohibited, except where expressly allowed by copyright laws.
NETASQ applies a method of constant development and as such reserves the right to modify and
improve any product described in the document without prior notice.
Under no circumstances shall NETASQ be held liable for any loss of data or revenue, or any
special damage or incident, resulting from or indirectly caused by the use of the product and its
associated documentation.
The contents of this document relate to the developments in NETASQ’s technology at the time of
its writing. With the exception of the mandatory applicable laws, no guarantee shall be made in
any form whatsoever, expressly or implied, including but not limited to implied warranties as to the
merchantability or fitness for a particular purpose, as to the accuracy, reliability or the contents of
the document. NETASQ reserves the right to revise this document, to remove sections or to
remove this whole document at any moment without prior notice.
To ensure the availability of products, which may vary according to your geographical locations,
contact your nearest NETASQ distributor.
Products concerned
U30, U70, U120, U250, U450, U1100, U1500 and U6000,
NG1000-A, NG5000-A.
To Next Page
Loading...
