Setup Wizard
The NF18ACV’s Setup Wizard will open the INTERNET connection page. This is indicated on the Wizard’s process task line.
INTERNET settings
The INTERNET settings prompt you to select the WAN connection type that you will be using and to enter all the parameters required to enable the service.
First select your INTERNET SERVICE: ADSL, VDSL or Ethernet WAN
Then select from the available range of CONNECTION TYPES for that type of service.
Your ISP (Internet Service Provider) will have advised you which service and connection type you will be using.
ADSL (Asymmetric Digital Subscriber Line ) is the most common telephone line internet service for typical consumers. There are a number of variations of ADSL, for example ADSL2 and ADSL2+. For
purposes of this manual ADSL refers to all of these related service types.
VDSL (Very-high-bit-rate digital subscriber line) and second-generation VDSL2, are digital subscriber line (DSL) technologies providing data transmission faster than asymmetric digital subscriber line
(ADSL). VDSL services may or may not be available from your ISP or in your area. Check with your ISP.
Ethernet WAN services are normally employed when part of the internet connection is cable or fibre optic or other very high speed services.
To Next Page
Loading...
Need help?
General
