NetComm Wireless NF18ACV User Manual

VDSL/ADSL2+ Dual Band AC1600 Gigabit Gateway with VoIP – NF18ACV
9 of 93
UG01040 v 1.04 December 2018
© NetComm Wireless 2018
LAB E L
I C O N
C O L O U R
D E F I N I T I O N
USB
Green
A USB device is connected.
Green
Blinking
Data is being transmitted through the USB interface.
Off
No USB device is connected to the USB interface.
Telephone
1
2
Green
A handset is registered.
Green
Blinking
Incoming call or the handset is in use.
Off
No handset registered
Rear view
The following interfaces are available on the rear panel of the NF18ACV:
Figure 1 – NF18ACV router rear view
N O .
I N T E R F A C E
D E S C R I P T I O N
1
DSL
Use the provided RJ11 cable to connect the router to the
telephone line operating your xDSL service.
2
Telephone 1 and
2
Connect a regular analogue telephone handset here for use with
a VoIP service.
3
Ethernet 1 - 4
Gigabit Ethernet LAN ports. Connect your Ethernet based
devices to one of these ports for high-speed internet access.

NetComm Wireless NF18ACV Specifications

General

Brand	NetComm Wireless
Model	NF18ACV
Category	Gateway
Language	English