NetComm Wireless NF18ACV User Manual

VDSL/ADSL2+ Dual Band AC1600 Gigabit Gateway with VoIP – NF18ACV
28 of 93
UG01040 v 1.04 December 2018
© NetComm Wireless 2018
Wireless 2.4 GHz
ITEM
D E S C R I P T I O N
Wireless network status
Enabled or Disabled
Wireless network name
Enter a recognisable name in case there are other 2.4 GHz services in the area.
Channel
1~9 or Auto
Bandwidth
20 MHz or 40 MHz
Security
Can be OPEN (not recommended), 802.1x, WPA2, WPA2-PSK, Mixed WPA / WPA2, or
Mixed WPA / WPA2-PSK
Wireless Client details – A list of all devices that are currently accessing this 2.4 GHz WiFi service.
For each device four items of information are displayed:
Name
The device name.
SSID
The WiFi network name identifier, also known as SSID (service set identifier).
IP Address
The current IP address of the device.
MAC Address
The device’s unique MAC (Media Access Control) address
Wireless 5 GHz
I T E M
D E S C R I P T I O N
Wireless network status
Enabled or Disabled
Wireless network name
Enter a recognisable name in case there are other 5 GHz services in the area.
Channel (Frequency)
Bandwidth
20 MHz, 40 MHz or 80 MHz
Security
Wireless Client details – A list of all devices that are currently accessing this 5 GHz WiFi service.
For each device four items of information are displayed:
Name
The device name.
SSID
The WiFi network name identifier, also known as SSID (service set identifier).
IP Address
The current IP address of the device.
MAC Address
The device’s unique MAC (Media Access Control) address
For more information on both 2.4 GHz and 5GHz Wireless settings refer to the WIRELESS section on page 32.

NetComm Wireless NF18ACV Specifications

General

Model	NF18ACV
Category	Gateway
WiFi Standard	802.11ac
Ethernet Ports	4 x Gigabit Ethernet
USB Ports	1 x USB 2.0
VoIP	2 x FXS Ports
WiFi Bands	Dual Band (2.4GHz & 5GHz)
WAN Port	1 x Gigabit Ethernet
Security	WPA/WPA2
DSL	VDSL2 / ADSL2+ / ADSL2 / ADSL